AudioRoundTable.com: Pi Speakers » tuning the Alpha 10"

Home » Sponsored » Pi Speakers » tuning the Alpha 10"

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: tuning the Alpha 10" [message #47486 is a reply to message #47485]

Tue, 16 August 2005 10:32

Wayne Parham
Messages: 18726
Registered: January 2001

Illuminati (33rd Degree)

If I remember, the Oris horn can be used down to around 250Hz. If you crossover there, wavelegth is about 4½ feet long. I'd probably use a simple first-order filter, just a 6.0mH coil in series with the woofer. You can expect summing to be good if the woofer is placed directly underneath the Oris horn.

Report message to a moderator

[Message index]

		tuning the Alpha 10" By: Black on Tue, 16 August 2005 08:55
		Re: tuning the Alpha 10" By: Wayne Parham on Tue, 16 August 2005 09:56
		Re: tuning the Alpha 10" By: Black on Tue, 16 August 2005 10:07
		Re: tuning the Alpha 10" By: Wayne Parham on Tue, 16 August 2005 10:32
		that seem easy By: Black on Tue, 16 August 2005 10:33
		4 cu ft @ 35Hz. Isn't that a 2PI Tower? (nt) By: GarMan on Tue, 16 August 2005 14:28
		Pretty close By: Wayne Parham on Tue, 16 August 2005 15:11
		Re: tuning the Alpha 10" By: GarMan on Wed, 17 August 2005 07:33
		Re: tuning the Alpha 10" By: Black on Wed, 17 August 2005 11:31
		Re: tuning the Alpha 10" By: GarMan on Wed, 17 August 2005 11:51

Previous Topic:	What if the "live cabinet" Co's. like Audio Note are right?
Next Topic:	Speaker Voice Coil Cooling System Valve

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Jul 17 04:47:23 CDT 2024