AudioRoundTable.com: Pi Speakers » Big Amp mating with a 4 Pi

Home » Sponsored » Pi Speakers » Big Amp mating with a 4 Pi

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Big Amp mating with a 4 Pi [message #47433 is a reply to message #47411]

Thu, 04 August 2005 22:41

drguayo
Messages: 84
Registered: May 2009

Viscount

I have Pi-4's but with the eminence Kilomax woofers/2002 compression

I use a Crest CA-6 with great results - 400w/channel @8ohm - the kilomax need gobs of power(1000 would work too) - I did have Classe DR-9(150w per) but not enough juice.

if you get a CA-6 - get an older one - I forget what year this model went downhill after the company got bought out.

Report message to a moderator

[Message index]

		Big Amp mating with a 4 Pi By: Hakn on Sun, 31 July 2005 11:36
		Re: Big Amp mating with a 4 Pi By: Wayne Parham on Sun, 31 July 2005 14:25
		Re: Big Amp mating with a 4 Pi By: Hakn on Sun, 31 July 2005 17:21
		Re: Big Amp mating with a 4 Pi By: Wayne Parham on Sun, 31 July 2005 20:21
		Re: Big Amp mating with a 4 Pi By: Manualblock on Sun, 31 July 2005 20:28
		Re: Big Amp mating with a 4 Pi By: Manualblock on Sun, 31 July 2005 16:22
		Re: Don't fool around with medium power By: BillEpstein on Sun, 31 July 2005 17:19
		Re: Don't fool around with medium power By: Hakn on Sun, 31 July 2005 17:27
		I use this on the bottom By: wunhuanglo on Sun, 31 July 2005 21:20
		Re: I use this on the bottom By: jshoc on Thu, 11 August 2005 20:02
		Re: Big Amp mating with a 4 Pi By: drguayo on Thu, 04 August 2005 22:41

Previous Topic:	Amp selection for 2 Pi Towers.
Next Topic:	coaxial driver in midhorn

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Nov 18 11:17:19 CST 2024