Home » Sponsored » Pi Speakers » Big Amp mating with a 4 Pi
Big Amp mating with a 4 Pi [message #47411] Sun, 31 July 2005 11:36 Go to next message
Hakn is currently offline  Hakn
Messages: 4
Registered: May 2009
Esquire
I am keen on getting a 250Watt per channel power amp for myset up.

Current Setup:
CD player: Toshiba 3950 CD player, heavily modded.
PreAmp: Transcendent Sound, Grounded Grid
Speakers: 4 Pi with Delta Pro 15, 6ft3 cabinet
Power Amp: 100w Onkyo

Music:
75% Rock - played loud
25 Jazz, Blues Classical

Room: 12ft X 33ft X 7.5ft (height) with diffusors, base absorbers..

See some nice power amps, Bryston and Aragons on Audiogon.

Question: what do you think about the synergy with the proposed amps?


Hakn Sr.

Re: Big Amp mating with a 4 Pi [message #47412 is a reply to message #47411] Sun, 31 July 2005 14:25 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18786
Registered: January 2001
Illuminati (33rd Degree)

I dig the high power amps. Amps under ten watts will do everything you want to do for a room under 500 square feet or so, but when you increase power it takes you to a whole new level.


Re: Big Amp mating with a 4 Pi [message #47413 is a reply to message #47411] Sun, 31 July 2005 16:22 Go to previous messageGo to next message
Manualblock is currently offline  Manualblock
Messages: 4973
Registered: May 2009
Illuminati (13th Degree)
Have you considered a nice SS class A amp; Threshold or Nakamichi? They sound phenomenal with the Pi 4's. I use a Luxman M-120 Duo-Beta and it is a great combo. Better than the Bryston 4b we tried in the opinion of a couple of us. In fact I think the Pi 4's and Class A is about as good as sound gets.

Re: Don't fool around with medium power [message #47414 is a reply to message #47411] Sun, 31 July 2005 17:19 Go to previous messageGo to next message
BillEpstein is currently offline  BillEpstein
Messages: 886
Registered: May 2009
Illuminati (2nd Degree)
Go for the Gusto, 1000 watts!


Re: Big Amp mating with a 4 Pi [message #47415 is a reply to message #47412] Sun, 31 July 2005 17:21 Go to previous messageGo to next message
Hakn is currently offline  Hakn
Messages: 4
Registered: May 2009
Esquire
Interesting suggestions - Luxman and Nakamichi... class A amps.

What about OTL's - the T16 or the newly announced Beast (more than I want to spend) from TranscendentSound?

Hakn

Re: Don't fool around with medium power [message #47416 is a reply to message #47414] Sun, 31 July 2005 17:27 Go to previous messageGo to next message
Hakn is currently offline  Hakn
Messages: 4
Registered: May 2009
Esquire
Lots of power in that monster - Crown!

At a 1000 Watts, I wouldn't be surprised if the drivers might spontaneously combust.

A good test for this set up would be, Chemical Brothers, Bass Test - this song has a serious bass beat!

Hakn


Re: Big Amp mating with a 4 Pi [message #47417 is a reply to message #47415] Sun, 31 July 2005 20:21 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18786
Registered: January 2001
Illuminati (33rd Degree)

Never heard 'em, either one of the Rozenblit amps. I've spoken with Bruce a couple of times on the telephone, and he seems like a nice guy. I had hoped he would make last years GPAF, since it's only about 4 hours from him. But he didn't. Maybe next year.


Re: Big Amp mating with a 4 Pi [message #47418 is a reply to message #47415] Sun, 31 July 2005 20:28 Go to previous messageGo to next message
Manualblock is currently offline  Manualblock
Messages: 4973
Registered: May 2009
Illuminati (13th Degree)
OTL are they? I would stay with the high power; the 4's thrive on it.
Seriously I have tried lots of amps on these and the big SS powerhouse names like Threshold work best but I have a sleeper amp that we stumbled upon during a tryout. If you can't find a used class A SS amp.
The Audio Research D-120b. SS and pretty cheap around 600$ or less used. Talk about the perception of power: this is it. Very massive sounding.
Tube wise; the best was the Harmon Kardon Citation II. In fact we are listening to that combination now, my friend has it here for storage since he's moving. 60 watts per side but huge transformers.
Still; I personally like the 50 watt Threshold myself. The Class A runs hot but the sound is much more musical.
Wayne has most definately voiced these for big SS watts; not that they don't work with tubes but they like SS. This of course is all my opinion and to be taken with a grain of your personal salt. I only offer that I love these speakers and have tried many of my acquaintences amps on them. They do rise to the level of the equipment, don't be tempted to sell them short with cheap amps; you will regret it.
Sorry if this is irrelevent to your question.

I use this on the bottom [message #47419 is a reply to message #47411] Sun, 31 July 2005 21:20 Go to previous messageGo to next message
wunhuanglo is currently offline  wunhuanglo
Messages: 912
Registered: May 2009
Illuminati (2nd Degree)
2-ways with JBL 2225's - kind of 4Pi-ish.

Happy-Happy.


Re: Big Amp mating with a 4 Pi [message #47433 is a reply to message #47411] Thu, 04 August 2005 22:41 Go to previous messageGo to previous message
drguayo is currently offline  drguayo
Messages: 84
Registered: May 2009
Viscount
I have Pi-4's but with the eminence Kilomax woofers/2002 compression

I use a Crest CA-6 with great results - 400w/channel @8ohm - the kilomax need gobs of power(1000 would work too) - I did have Classe DR-9(150w per) but not enough juice.

if you get a CA-6 - get an older one - I forget what year this model went downhill after the company got bought out.

Previous Topic: Amp selection for 2 Pi Towers.
Next Topic: coaxial driver in midhorn
Goto Forum:
  


Current Time: Wed Nov 27 02:54:07 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest