Big Amp mating with a 4 Pi [message #47411] |
Sun, 31 July 2005 11:36 |
Hakn
Messages: 4 Registered: May 2009
|
Esquire |
|
|
I am keen on getting a 250Watt per channel power amp for myset up. Current Setup: CD player: Toshiba 3950 CD player, heavily modded. PreAmp: Transcendent Sound, Grounded Grid Speakers: 4 Pi with Delta Pro 15, 6ft3 cabinet Power Amp: 100w Onkyo Music: 75% Rock - played loud 25 Jazz, Blues Classical Room: 12ft X 33ft X 7.5ft (height) with diffusors, base absorbers.. See some nice power amps, Bryston and Aragons on Audiogon. Question: what do you think about the synergy with the proposed amps? Hakn Sr.
|
|
|
|
|
|
Re: Big Amp mating with a 4 Pi [message #47415 is a reply to message #47412] |
Sun, 31 July 2005 17:21 |
Hakn
Messages: 4 Registered: May 2009
|
Esquire |
|
|
Interesting suggestions - Luxman and Nakamichi... class A amps. What about OTL's - the T16 or the newly announced Beast (more than I want to spend) from TranscendentSound? Hakn
|
|
|
Re: Don't fool around with medium power [message #47416 is a reply to message #47414] |
Sun, 31 July 2005 17:27 |
Hakn
Messages: 4 Registered: May 2009
|
Esquire |
|
|
Lots of power in that monster - Crown! At a 1000 Watts, I wouldn't be surprised if the drivers might spontaneously combust. A good test for this set up would be, Chemical Brothers, Bass Test - this song has a serious bass beat! Hakn
|
|
|
|
|
|
Re: Big Amp mating with a 4 Pi [message #47433 is a reply to message #47411] |
Thu, 04 August 2005 22:41 |
drguayo
Messages: 84 Registered: May 2009
|
Viscount |
|
|
I have Pi-4's but with the eminence Kilomax woofers/2002 compression I use a Crest CA-6 with great results - 400w/channel @8ohm - the kilomax need gobs of power(1000 would work too) - I did have Classe DR-9(150w per) but not enough juice. if you get a CA-6 - get an older one - I forget what year this model went downhill after the company got bought out.
|
|
|