AudioRoundTable.com: Pi Speakers » 2 Pi tower baffles

Home » Sponsored » Pi Speakers » 2 Pi tower baffles

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 2 Pi tower baffles [message #47381 is a reply to message #47378]

Sun, 24 July 2005 10:24

Shane
Messages: 1117
Registered: May 2009

Illuminati (3rd Degree)

Bill, you're work is just fantastic. I'm looking for the WAF on this project and she really likes the idea of say a 2" wide solid oak edge on the front baffles similar to your picture there. A small reveal is a good idea, better than leaving the pieces pround I think.

Report message to a moderator

[Message index]

		2 Pi tower baffles By: Shane on Sun, 24 July 2005 00:23
		Re: 2 Pi tower baffles By: BillEpstein on Sun, 24 July 2005 04:47
		Re: 2 Pi tower baffles By: spkrman57 on Sun, 24 July 2005 04:53
		Re: 2 Pi tower baffles By: Shane on Sun, 24 July 2005 10:24
		Re: 2 Pi tower baffles By: elektratig on Sun, 24 July 2005 08:53
		If your doing something kinda fancy... By: GarlandGarland on Sun, 24 July 2005 10:47
		Re: If your doing something kinda fancy... By: Shane on Sun, 24 July 2005 11:01
		Re: If your doing something kinda fancy... By: Wayne Parham on Sun, 24 July 2005 12:38
		Re: If your doing something kinda fancy... By: GarMan on Mon, 25 July 2005 14:44
		Re: If your doing something kinda fancy... By: Shane on Mon, 25 July 2005 15:16
		Re: If your doing something kinda fancy... By: Matts on Mon, 25 July 2005 20:14
		Finishing BB By: GarMan on Tue, 26 July 2005 09:10
		Re: If your doing something kinda fancy... By: Shane on Mon, 25 July 2005 15:17
		Re:Hey 2XGarland By: BillEpstein on Sun, 24 July 2005 11:42
		Well, the BB I bought was very dense... By: GarlandGarland on Sun, 24 July 2005 19:17
		Re: Well, the BB I bought was very dense... By: Wayne Parham on Sun, 24 July 2005 20:06
		Found a place to get wood! By: Shane on Mon, 25 July 2005 08:24

Previous Topic:	Reflex volume of 4PI Pro - about 2.5 ft^3 ?
Next Topic:	Plans For 1 PI

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 30 10:50:42 CST 2024