AudioRoundTable.com: Pi Speakers » Would your midrange horn work with a PD107 ?

Home » Sponsored » Pi Speakers » Would your midrange horn work with a PD107 ?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Would your midrange horn work with a PD107 ? [message #47361]

Fri, 22 July 2005 12:15

Rob*w*
Messages: 2
Registered: May 2009

Esquire

Hi Wayne,

I chose the precision devices PD107 as a cheaper alternative to the jbl2012 driver for my 3-way project. (I didn't need response below 300Hz either) I'd like to try a horn in the mids to see/hear what it does. Would my driver work ok in it ?

its here btw:

http://www.precision-devices.com/ShowDetails.asp?id=13

Cheers!

Rob

Report message to a moderator

Re: Would your midrange horn work with a PD107 ? [message #47363 is a reply to message #47361]

Fri, 22 July 2005 12:22

Wayne Parham
Messages: 18789
Registered: January 2001

Illuminati (33rd Degree)

I haven't tested the driver, but most of the differences between drivers on this horn are above 1kHz. So that's what you'll want to look at, in regards to crossover for your tweeter.

Report message to a moderator