Home » Sponsored » Pi Speakers » 2206
2206 [message #47162] Wed, 22 June 2005 01:03 Go to next message
andreaspaulsen is currently offline  andreaspaulsen
Messages: 7
Registered: May 2009
Esquire
Hi All

My pro fours are still in the shop and I am not sure they will have access to the livingroom (SWMO's opinion). So I am searching for other options. I am able to put a largeish sub (such as Bills T36S) under the (to be homebuild) couch. I have got a pair of 2206. They pialign in 0.73 ft^3 which really is a very small enclosure. Assuming cornerplacement hanging from the ceiling with the tweeter below the woofer, how low can I cross to the sub, hopefully around 60-70 Hz) ?

Wayne Do you still have the Pro 3 plans using the 2206's. If so, I would like a set.

Cheers and take care with the tablesaw.
Andreas




You've got mail! [message #47163 is a reply to message #47162] Wed, 22 June 2005 03:16 Go to previous messageGo to next message
Wayne Parham is currently online  Wayne Parham
Messages: 18783
Registered: January 2001
Illuminati (33rd Degree)

The Pro three π now uses a DX25 tweeter. I just finished testing about a month ago, and it's a very good loudspeaker. I suggest pairing it with a JBL 2245 in a 10.0ft3 box tuned to 30Hz for a sub. Another option is a JBL 2235 in the same size cabinet, but tuned to 23Hz.


Re: You've got mail! [message #47166 is a reply to message #47163] Wed, 22 June 2005 05:15 Go to previous messageGo to next message
andreaspaulsen is currently offline  andreaspaulsen
Messages: 7
Registered: May 2009
Esquire
Thanks Wayne

I haven't recieved the plans yet -- problems with your mailserver ??

I did recieve the notification from audioroundtable.com

Cheers
Andreas

Re: You've got mail! [message #47167 is a reply to message #47166] Wed, 22 June 2005 05:43 Go to previous messageGo to next message
Wayne Parham is currently online  Wayne Parham
Messages: 18783
Registered: January 2001
Illuminati (33rd Degree)

No problems, I was just slow to send. The ink on these plans is still wet. I was commissioned to design them for a home theater install recently, and I have just finished finalizing the details.


Re: 2206 [message #47181 is a reply to message #47162] Thu, 23 June 2005 15:26 Go to previous messageGo to next message
LAL is currently offline  LAL
Messages: 40
Registered: May 2009
Baron
Wayne,
Picking up on Andreas' question, approximately where is the -3db down point on the Pro 3? Any reason why you couldn't use the JBL compression tweeter and Eminence horn on top of the cabinet since I understand that interior room is limited in the Pro 3 cabinet? If so would the Pro 3 use the same crossover as the Pro 4? I am guessing that there may be many interested in a top of the line all JBL system in a size a little smaller than the Pro 4s to use with a subwoofer crossed over around 60-80HZ.

Larry

Re: 2206 [message #47182 is a reply to message #47181] Thu, 23 June 2005 15:52 Go to previous message
Wayne Parham is currently online  Wayne Parham
Messages: 18783
Registered: January 2001
Illuminati (33rd Degree)

The Professional Series three π loudspeaker has f3 of 60Hz. The last version used a compression driver and horn, so you could make that version just like you've described.


Previous Topic: Wayne can you email plans for the 3 pi theater
Next Topic: HF Compression driver without horn flare?
Goto Forum:
  


Current Time: Sun Nov 17 15:52:37 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest