Wayne Parham Messages: 18836 Registered: January 2001
Illuminati (33rd Degree)
I have a 6dB tweeter crossover, so I'll send you the schematic if you want. You probably already have it, because there's a chart of values that show optional 6dB-14dB components included with the schematic of all the large two-way speakers (3π, 4π). If you used a 6dB tweeter circuit with the midhorn, you'd definitely want to change the midhorn attenuation level to match. But I think I'd go with either the (10dB compensation) mid/tweeter passive crossover shown in the seven π plans or run a fully active system. If you run 6dB compensation then you'll still need additional EQ.