Could I please get a copy of the plans? I'll be running a pair of 2226's active below each midhorn and hf horn, but everything else should be close. I won't be needing to match a lf subsystem, so I can run the hf horn at the minimal 6 db attenuation which results in a 104 db hf section. I'm guessing I'll need to pad the midhorn down a db or two to get to matching levels. Do you know what resistor values would be required to attenuate 1-2 db in a 8 ohm system? I can convert for appropriate 16 ohm values. Thanks! Jerrod