Hi Wayne. When building a passive XO from scratch, what's an appropriate voltage rating for caps? By my calculation, a 200W amp only puts out 40V into 8ohms. This would mean that Solen's lowest rated caps at 250V should be fine, right? No need to use their PPE series of 650V?
Wayne Parham Messages: 18787 Registered: January 2001
Illuminati (33rd Degree)
Peak voltage is 1.414 times greater than RMS, so always consider that when choosing capacitors. And there are some frequencies where LC peaking can raise voltage across some components higher than the source. A good example is capacitor C2 in the π Speakers two-way crossover. But 250V is plenty for the capacitors in a crossover like this.
See the π Speaker Crossover document. Pages 68-80 show the voltage across each component in a π Speakers two-way crossover. The source voltage is 50Vrms (70Vpeak) and there are graphs for each component showing the voltage across them as a function of frequency.
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
