Home » Sponsored » Pi Speakers » Old style loudspeakers
Old style loudspeakers [message #45154] Tue, 03 August 2004 20:30 Go to next message
Mattulator is currently offline  Mattulator
Messages: 1
Registered: May 2009
Esquire
I recently picked up 2 peavey LH-1 enclosures and they are the suspended wedge style with the driver facing the rear wall of the cabinet.
What is this style called and where can I find information on the pros/cons of this design.

Thanks

Re: Old style loudspeakers [message #45157 is a reply to message #45154] Wed, 04 August 2004 11:24 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18783
Registered: January 2001
Illuminati (33rd Degree)
Are you sure your speakers aren't FH-1's? Do they look sort of like Klipsch LaScala's?

If so, they're a 60Hz midbass horn. Horns generate more output than direct radiators over a narrow frequency range. The FH-1 has sensitivity of about 104dB/W/M and can generate maximum output of 125dB/M from 60Hz to 400Hz or so.

Re: Old style loudspeakers [message #45159 is a reply to message #45154] Wed, 04 August 2004 11:36 Go to previous message
spkrman57
Messages: 522
Registered: May 2009
Illuminati (1st Degree)
If they are FH-1's, how you orient them will also affect the response. I have turned mine on their sides and found better bottom end, but poorer mids. They truly operate best run from 80hz to around 250hz, above and below that is usually affected by the room and driver used.
Ron

Previous Topic: Pi 8 question
Next Topic: Speaking of Pro Amps
Goto Forum:
  


Current Time: Mon Nov 04 18:06:46 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest