AudioRoundTable.com: Pi Speakers » What is the Pro 4 Pi's net volume and tuning?

Home » Sponsored » Pi Speakers » What is the Pro 4 Pi's net volume and tuning?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

What is the Pro 4 Pi's net volume and tuning? [message #44896]

Wed, 07 July 2004 08:56

James W. Johnson
Messages: 199
Registered: May 2009

Master

What is the Pro 4 Pi's net volume and tuning? The reason I ask is because I am thinking about straying away from the Pi box by a little bit.

Also does the driver orientation and baffle width matter much?

Report message to a moderator

Re: What is the Pro 4 Pi's net volume and tuning? [message #44897 is a reply to message #44896]

Wed, 07 July 2004 09:40

James W. Johnson
Messages: 199
Registered: May 2009

Master

I had something like this in mind...
https://home.comcast.net/~bentvalve/piswew.JPG

Or how about just using the Pi box and using a 4" round port in the rear?

Report message to a moderator

Re: What is the Pro 4 Pi's net volume and tuning? [message #44898 is a reply to message #44897]

Wed, 07 July 2004 15:38

Wayne Parham
Messages: 18791
Registered: January 2001

Illuminati (33rd Degree)

There are lots of deviations and people have made some mighty fine looking speakers, both of the exact layout shown in the plans and from some with slight dimensional differences. See the photos in the post called "Pictures of Pi-speakers."

A PiAlign'ed JBL 2226 is 2.5ft3 port tuned to 38Hz. The 2226 works pretty well in ported cabinets from 2-5ft3 tuned to 40Hz, so you have a wide range of good choices when building your cabinets.

Report message to a moderator

Previous Topic:	Stage 4 Pi
Next Topic:	Could the PSD-2002 be $500 if it was made in Europe?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 30 09:26:09 CST 2024