| Lone Star Bottleheads - Houston, July 28 [message #4405] |
Sat, 14 July 2007 17:23  |
FredT
Messages: 704
Registered: May 2009
|
Illuminati (1st Degree) |
|
|
The Lone Star Bottleheads will meet at my house in Houston on July 28. See the link below for meeting information, directions, and pictures from our past meetings.
|
|
|
|
|
|
|
|
|
|
| Velvet Hammers [message #4473 is a reply to message #4472] |
Thu, 02 August 2007 15:36  |
FredT
Messages: 704
Registered: May 2009
|
Illuminati (1st Degree) |
|
|
|
They are a variation on the "Blue Wonders" from the Parts Express Project pages. The woofer is the Hammer 18CLF, a recent PE buyout driver which is similar to the Eminence Definimax 4018LF, the Eminence Beta 8 as the midrange, and the Eminence PSD2002 compression driver (instead of the range-limited ASD1001) with a Dayton waveguide. The crossover is the same as in the project except I used Dayton poly caps instead of electrolytics in the midrange crossover and Northcreeks in the tweeter signal path. The enclosures are built of 3/4" Birch plywood lined with 1/2" plywood plus extensive internal reinforcement. I'm not entirely pleased with these speakers. They sound great at low power, but when driven reasonably hard by a high power amp, tube or SS, with music having strong bass content such as classical pipe organ music, there's audible distortion from the woofer. Confused sounding bass distortion is the last thing I would have expected from a cast aluminum frame Eminence Pro woofer with a copper shorting ring rated at 800 watts RMS. I wonder if the 400hz crossover isn't too high for this driver. Here's a link to the specs for the Hammer 18: http://www.partsexpress.com/pe/showdetl.cfm?Partnumber=299-444
|
|
|
|
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
