AudioRoundTable.com: Pi Speakers » Holy Trigonometry!

Home » Sponsored » Pi Speakers » Holy Trigonometry!

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Great link - and there's always Dr. Math [message #44588 is a reply to message #44555]

Sat, 08 May 2004 17:34

Adrian Mack
Messages: 568
Registered: May 2009

Illuminati (1st Degree)

I see, you could do it with the math I guess - is the angle constant along the whole edge? On the tractrix horns I did the angle did vary considerably, the conicals appeared to have a bit of a varying angle too on the ones I built. Thats really why I use the 'wedge' method, so the exact angle is achieved along the whole length plus I don't need to setup the saw for bevel cuts!

By the way , nice work on the horn, looks cool.

Report message to a moderator

[Message index]

		Holy Trigonometry! By: Duncan McBride on Sun, 02 May 2004 18:44
		Re: Holy Trigonometry! By: Bill Martinelli on Sun, 02 May 2004 19:11
		Re: Holy Trigonometry! By: Wayne Parham on Mon, 03 May 2004 03:20
		You don't need the math By: Adrian Mack on Mon, 03 May 2004 03:36
		Great link - and there's always Dr. Math By: Duncan McBride on Mon, 03 May 2004 07:30
		Re: Great link - and there's always Dr. Math By: Wayne Parham on Mon, 03 May 2004 10:36
		Re: Great link - and there's always Dr. Math By: Adrian Mack on Sat, 08 May 2004 17:34
		Re: Great link - and there's always Dr. Math By: Duncan McBride on Sat, 08 May 2004 21:07

Previous Topic:	7 PI profess'l series w / 10 in. mid plans
Next Topic:	Midhorn/8pi

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Sep 27 05:16:15 CDT 2024