AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » TEASER

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: TEASER [message #44358 is a reply to message #44342]

Sat, 10 April 2004 10:16

Duncan McBride
Messages: 41
Registered: May 2009

Baron

I'm really intrigued by the 8pi. I built the 2pi towers and I really like them, but it would be neat to try out the Alpha 10s like this. How would the crossover vary from the tower if one were to use the PSD 2002 with the Alpha in the 8pi? Or would you recommend a different tweeter?

Report message to a moderator

Re: TEASER [message #44360 is a reply to message #44358]

Sat, 10 April 2004 15:42

Wayne Parham
Messages: 18765
Registered: January 2001

Illuminati (33rd Degree)

I'm planning to use the PSD2002.

Report message to a moderator

Re: TEASER [message #44361 is a reply to message #44358]

Sat, 10 April 2004 18:00

Adrian Mack
Messages: 568
Registered: May 2009

Illuminati (1st Degree)

The Pi Speakers crossover is a perfect fit for the application.

π Speakers Crossover Document
π Speakers Crossover Compensation Values

I'm quite sure you'd want to cross it at 1.6KHz if using the PSD2002. You could leave out the woofer crossover components and use their upper acoustic rolloff as the xover slope, I've been told.

Report message to a moderator

Pages (2): [ « ‹ 1 2]

Previous Topic:	Integration of mid and sub into theater 4's
Next Topic:	Source Impedance

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Sep 18 06:09:06 CDT 2024