AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Tower 2Pi ports

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Tower 2Pi ports [message #44128 is a reply to message #44127]

Tue, 09 March 2004 08:42

Wayne Parham
Messages: 18747
Registered: January 2001

Illuminati (33rd Degree)

The towers don't use a vent - It's just a cutout in the baffle that forms the port. We're actually looking for a large diameter vent that is very short, so the baffle width itself sets the length.

For 5/8" wood stock, cut a 4.5" diameter port hole.
For 3/4" stock, cut a 4.625" hole.
For 1", cut the hole 4.75" dia.

Report message to a moderator

[Message index]

		Tower 2Pi ports By: Chaz on Tue, 09 March 2004 07:20
		Re: Tower 2Pi ports By: Wayne Parham on Tue, 09 March 2004 08:42
		Port Calculator? By: elektratig on Wed, 10 March 2004 14:36
		Re: Port Calculator? By: Wayne Parham on Wed, 10 March 2004 15:33

Previous Topic:	Attenuator/Compensator
Next Topic:	Do Pro digital crossover have good sound quality for Hi-fi?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Aug 11 04:17:43 CDT 2024