AudioRoundTable.com: Pi Speakers » BETA 12LTA in a PiAlign enclosure

Home » Sponsored » Pi Speakers » BETA 12LTA in a PiAlign enclosure

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: BETA 12LTA in a PiAlign enclosure [message #44080 is a reply to message #44078]

Fri, 27 February 2004 20:23

Adrian Mack
Messages: 568
Registered: May 2009

Illuminati (1st Degree)

Five 1.25" diameter ports have almost the same cross sectional area as a single 2.5" diameter port. You could use the 5 ports if you wanted to, but there is no difference in vent air speeds between the two options.

Take a look at this post

http://www.audioroundtable.com/PiSpeakers/messages/14110.html

Report message to a moderator

[Message index]

		BETA 12LTA in a PiAlign enclosure By: HigherFi on Thu, 26 February 2004 17:32
		Re: BETA 12LTA in a PiAlign enclosure By: Wayne Parham on Thu, 26 February 2004 22:11
		Re: BETA 12LTA in a PiAlign enclosure By: HigherFi on Fri, 27 February 2004 03:28
		Re: BETA 12LTA in a PiAlign enclosure By: HigherFi on Fri, 27 February 2004 04:14
		Re: BETA 12LTA in a PiAlign enclosure By: Adrian Mack on Fri, 27 February 2004 07:31
		Re: BETA 12LTA in a PiAlign enclosure By: HigherFi on Fri, 27 February 2004 19:46
		Re: BETA 12LTA in a PiAlign enclosure By: Adrian Mack on Fri, 27 February 2004 19:49
		Re: BETA 12LTA in a PiAlign enclosure By: HigherFi on Fri, 27 February 2004 20:06
		Re: BETA 12LTA in a PiAlign enclosure By: Adrian Mack on Fri, 27 February 2004 20:23
		Re: BETA 12LTA in a PiAlign enclosure By: HigherFi on Fri, 27 February 2004 20:18
		Re: BETA 12LTA in a PiAlign enclosure By: Wayne Parham on Sat, 28 February 2004 00:09
		Re: BETA 12LTA in a PiAlign enclosure By: Wayne Parham on Fri, 27 February 2004 12:19
		Re: BETA 12LTA in a PiAlign enclosure By: Adrian Mack on Fri, 27 February 2004 19:45

Previous Topic:	professional seven pi
Next Topic:	2 pi and grill question

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Jul 13 12:29:37 CDT 2024