Home » Sponsored » Pi Speakers » Who's on top?
Who's on top? [message #43918] Wed, 11 February 2004 19:28 Go to next message
GarMan is currently offline  GarMan
Messages: 960
Registered: May 2009
Illuminati (2nd Degree)
Is there a reason why HF drivers are almost alway placed on top of the LF drivers? Why can't it go the other way?

Re: Who's on top? [message #43922 is a reply to message #43918] Wed, 11 February 2004 22:28 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18789
Registered: January 2001
Illuminati (33rd Degree)
Frequencies generated by the tweeter are more readily absorbed by stuff like carpet fibers, so you don't really want the tweeter down by the floor. Plus, the higher frequencies tend to travel more line of sight, so it's nice to have 'em at ear level. But if the speakers are installed high off the ground, perhaps mounted on the walls or high on bookshelves, it doesn't matter if you have the tweeter on the bottom. If they're high enough, it would even be preferable for the same reason that floorstanders should probably have the tweeter on top. Keep 'em close to ear level.

I've been at clubs . . . [message #43925 is a reply to message #43918] Thu, 12 February 2004 11:54 Go to previous message
Tightwad is currently offline  Tightwad
Messages: 41
Registered: May 2009
Baron
. . . where cabinets are hung from the ceiling, angled downwards, with HF horns at the bottom (i.e. "upside-down").

Presumably for the same reason floor-mounted have the horns on the top.

Previous Topic: Recommendation on Horn Flare for 4 Pi
Next Topic: Midrange+ HF positions,phase and goings-on *Q*
Goto Forum:
  


Current Time: Thu Nov 28 02:16:36 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest