AudioRoundTable.com: Pi Speakers » taming the piezoelectric

Home » Sponsored » Pi Speakers » taming the piezoelectric

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: taming the piezoelectric [message #43881 is a reply to message #43880]

Mon, 09 February 2004 00:28

gumby1
Messages: 63
Registered: May 2009

Viscount

Yes, there is something you can do. I was in the same position you are in. Wayne gave me a list of capacitors that I could try in series with the HF driver. I found that a 0.1uF 630V capacitor did just what I was looking for. I believe the attenuation for that capacitor was 7dB.

Report message to a moderator

[Message index]

		taming the piezoelectric By: wasteh202 on Sun, 08 February 2004 21:39
		Re: taming the piezoelectric By: gumby1 on Mon, 09 February 2004 00:28
		Re: taming the piezoelectric By: wasteh202 on Mon, 09 February 2004 10:16
		Re: taming the piezoelectric By: jlharden on Mon, 09 February 2004 11:10
		Re: taming the piezoelectric By: wasteh202 on Mon, 09 February 2004 14:10
		Re: taming the piezoelectric By: steve f on Mon, 09 February 2004 20:29
		Re: taming the piezoelectric By: wasteh202 on Tue, 10 February 2004 09:37
		Re: taming the piezoelectric, attn: Bill Epstein By: jlharden on Tue, 10 February 2004 07:54
		Re: taming the piezoelectric, attn: Bill Epstein By: BillEpstein on Tue, 10 February 2004 15:26
		Re: taming the piezoelectric, attn: Bill Epstein By: jlharden on Tue, 10 February 2004 19:10
		Re: taming the piezoelectric By: GarMan on Mon, 09 February 2004 07:17
		Re: taming the piezoelectric By: ports on Tue, 10 February 2004 10:20
		Re: taming the piezoelectric By: GarMan on Wed, 11 February 2004 20:11

Previous Topic:	2pi tower pics
Next Topic:	Recommendation on Horn Flare for 4 Pi

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Nov 26 14:04:05 CST 2024