AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » pi corner horn

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: pi corner horn [message #43678 is a reply to message #43645]

Thu, 15 January 2004 16:55

David Morrison
Messages: 16
Registered: May 2009

Chancellor

Model
9512e

Woofer Diameter
12"
Voice Coil Diameter
3"
Voice Coil Type
4 layer DVC

Magnet Weight
300 oz

Cone Type
Synthetic Fiber Blend

Power Handling RMS
1200

Power Handling Music
2500

Suspension
75 mm

X-max
29 mm

Nominal Impedance
Dual 2,Ohm

DC Resistance
1.9 Ohm

Free Air Resonance
34 Hz

Qts
0.31

Qes
0.33

Qms
4.15

Vas
35 L

Le mH
.9

Sensitivity
89 dB

Mounting Depth
7.25"

Cut Out Diameter
11 1/16"

Speaker Weight
44

Report message to a moderator

[Message index]

		pi corner horn By: David Morrison on Tue, 13 January 2004 06:55
		Re: pi corner horn By: Wayne Parham on Tue, 13 January 2004 09:33
		Re: pi corner horn By: Dean Kukral on Tue, 13 January 2004 11:03
		Re: pi corner horn By: Wayne Parham on Tue, 13 January 2004 15:48
		Re: pi corner horn By: David Morrison on Tue, 13 January 2004 11:14
		Re: pi corner horn By: Wayne Parham on Tue, 13 January 2004 15:43
		Re: pi corner horn By: David Morrison on Thu, 15 January 2004 16:55
		Re: pi corner horn By: Wayne Parham on Thu, 15 January 2004 17:49
		Re: pi corner horn By: David Morrison on Fri, 16 January 2004 09:32
		Re: pi corner horn By: Wayne Parham on Fri, 16 January 2004 10:20
		Re: pi corner horn By: David Morrison on Fri, 16 January 2004 11:51
		Re: pi corner horn By: Wayne Parham on Fri, 16 January 2004 12:57
		Re: pi corner horn By: David Morrison on Tue, 20 January 2004 13:18
		Re: pi corner horn By: Wayne Parham on Tue, 20 January 2004 13:42

Previous Topic:	Some Newbie Questions
Next Topic:	Audiophile parts?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Jul 13 15:08:30 CDT 2024