AudioRoundTable.com: Pi Speakers » Theater 4 cutout problem

Home » Sponsored » Pi Speakers » Theater 4 cutout problem

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Theater 4 cutout solution [message #43401 is a reply to message #43399]

Tue, 16 December 2003 18:45

Bill Martinelli
Messages: 677
Registered: May 2009

Illuminati (1st Degree)

You could cut some strips of wood 1/4 x 3/4 (for 3/4 baffle) glue them on to the edge of the hole with yellow glue and use 1" blue masking tape to clamp the 1/4" thick strips to the edge of the cut out. Make sure you tape them in place so the strips are in no way proud of the baffle on the front side. It would be a good idea to let this one sit overnight before continuing on.

Bill

Report message to a moderator

[Message index]

		Theater 4 cutout problem By: newsjeff on Tue, 16 December 2003 18:18
		Re: Theater 4 cutout solution By: Bill Martinelli on Tue, 16 December 2003 18:45
		Re: Theater 4 cutout problem By: Wayne Parham on Tue, 16 December 2003 18:48
		Re: Theater 4 cutout problem By: wunhuanglo on Tue, 16 December 2003 19:06

Previous Topic:	tweeter inductor
Next Topic:	Update

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Dec 04 14:07:49 CST 2024