AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Update

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Update [message #43386 is a reply to message #43383]

Mon, 15 December 2003 21:48

Wayne Parham
Messages: 18792
Registered: January 2001

Illuminati (33rd Degree)

I like horns like this - Simple and effective. So I wouldn't use the phase plug either. For your purpose, it seems to be an unnecessary complexity. A properly implemented phase plug will extend the top end, but you'll have a tweeter so that isn't terribly important.

As for crossover, I'd try to avoid crossover between 400Hz and 1600Hz. That's the vocal fundamental region, and your horn should cover the range very well.

Report message to a moderator

[Message index]

		Update By: Adrian Mack on Mon, 15 December 2003 19:10
		Re: Update By: Wayne Parham on Mon, 15 December 2003 20:03
		Re: Update By: Adrian Mack on Mon, 15 December 2003 20:32
		Re: Update By: Bill Martinelli on Mon, 15 December 2003 20:51
		Yep, but check this out ! By: Adrian Mack on Tue, 16 December 2003 00:10
		Re: Yep, but check this out ! By: Wayne Parham on Tue, 16 December 2003 02:37
		Re: Yep, but check this out ! By: Adrian Mack on Tue, 16 December 2003 03:52
		Motor chamber peaking By: Wayne Parham on Tue, 16 December 2003 10:08
		Re: Motor chamber peaking By: stupid newbie on Tue, 16 December 2003 12:42
		Look! Update By: Mike.e on Tue, 16 December 2003 19:36
		Re: Update By: Wayne Parham on Mon, 15 December 2003 21:48
		Re: Update By: Bill Martinelli on Mon, 15 December 2003 20:42

Previous Topic:	Theater 4 cutout problem
Next Topic:	Why the move???

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Dec 04 14:46:50 CST 2024