If I plan on using the conical horns, I can probably cross at 1.6KHz and not 1 or 1.2KHz. So if I do this, I'm considering the PXB2-1K6 crossover. I've been reading some of the older posts on this forum, and I think I've got it down.

Only thing I wanted to know, is R1, R2, and C1 tweeter compensation components, should they all be connected in parallel with each other (and in any order) and then those three components connected in series with the tweeter horn?

Should the woofer Zobel be connected in parallel or in series with the woofer? They are normally in parallel so I was assuming this to be the case.

Thanks!
Adrian