AudioRoundTable.com: Pi Speakers » How to connct an L-pad ?

Home » Sponsored » Pi Speakers » How to connct an L-pad ?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: How to connect an L-pad ? [message #43054 is a reply to message #43053]

Sun, 16 November 2003 15:48

Wayne Parham
Messages: 18787
Registered: January 2001

Illuminati (33rd Degree)

If your L-Pad is made for an 8 ohm load, then put an 8 ohm resistor across your tweeter. If the L-Pad is for 16 ohms, then put a 16 ohm resistor across the tweeter. Piezoelectric tweeters are primarily capacitive, and have fairly high impedance, so you'll need to add a shunt resistor across the tweeter to form a voltage divider for the L-Pad to work. Give that a try and see what happens.

Report message to a moderator

[Message index]

		How to connct an L-pad ? By: ports on Sun, 16 November 2003 07:50
		Re: How to connct an L-pad ? By: Bill Martinelli on Sun, 16 November 2003 09:03
		Re: How to connect an L-pad ? By: Jeff Robinson on Sun, 16 November 2003 09:08
		Re: How to connect an L-pad ? By: ports on Sun, 16 November 2003 11:16
		Re: How to connect an L-pad ? By: Wayne Parham on Sun, 16 November 2003 15:48
		Re: How to connect an L-pad ? By: ports on Mon, 17 November 2003 04:42
		Re: How to connct an L-pad ? By: Jeff Robinson on Sun, 16 November 2003 10:06

Previous Topic:	Another side of the small and cute vs. big and efficient debate:
Next Topic:	2 pi Tower - tweeter upgrade Wayne & others?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 23 05:25:53 CST 2024