AudioRoundTable.com: Pi Speakers » How to connct an L-pad ?

Home » Sponsored » Pi Speakers » How to connct an L-pad ?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: How to connect an L-pad ? [message #43050 is a reply to message #43048]

Sun, 16 November 2003 09:08

Jeff Robinson
Messages: 26
Registered: May 2009
Location: KC, MO

Chancellor

It should have come with a wiring diagram. The ones I've used have been marked to use terminal 1 for ground, 2 as load and 3 as input. In other words going from lowest number as lowest potential to ground to highest number as highest potential to ground. Do remember if using 2nd order network to reverse the polarity of the tweeter.

HTH

Jeff Robinson

look for - X-over for 8"

Report message to a moderator

[Message index]

		How to connct an L-pad ? By: ports on Sun, 16 November 2003 07:50
		Re: How to connct an L-pad ? By: Bill Martinelli on Sun, 16 November 2003 09:03
		Re: How to connect an L-pad ? By: Jeff Robinson on Sun, 16 November 2003 09:08
		Re: How to connect an L-pad ? By: ports on Sun, 16 November 2003 11:16
		Re: How to connect an L-pad ? By: Wayne Parham on Sun, 16 November 2003 15:48
		Re: How to connect an L-pad ? By: ports on Mon, 17 November 2003 04:42
		Re: How to connct an L-pad ? By: Jeff Robinson on Sun, 16 November 2003 10:06

Previous Topic:	Another side of the small and cute vs. big and efficient debate:
Next Topic:	2 pi Tower - tweeter upgrade Wayne & others?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 23 05:15:39 CST 2024