AudioRoundTable.com: Pi Speakers » Thermio Seven Pi Pro (16 ohm x-over values)

Home » Sponsored » Pi Speakers » Thermio Seven Pi Pro (16 ohm x-over values)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Thermio Seven Pi Pro (16 ohm x-over values) [message #43023 is a reply to message #42990]

Thu, 13 November 2003 08:52

jlharden
Messages: 94
Registered: May 2009

Viscount

Thanks to Wayne, Bill, and Ron....in no particular order! I've got a pretty good starting point on appropriate values and am figuring spice out enough to make reasonable choices regarding appropriate parts. Looking forward to getting the speakers setup. Not sure when I'll be able to build enclosures. Thanks again! Jerrod

Report message to a moderator

[Message index]

		Thermio Seven Pi Pro (16 ohm x-over values) By: jlharden on Tue, 11 November 2003 10:19
		16 ohm tweeter crossover values By: Wayne Parham on Tue, 11 November 2003 11:40
		Re: 16 ohm tweeter crossover values By: jlharden on Tue, 11 November 2003 11:54
		Re: 16 ohm tweeter crossover values By: BillEpstein on Tue, 11 November 2003 15:08
		My results with 4 Pi Pro using 16 ohm drivers By: spkrman57 on Tue, 11 November 2003 18:53
		Re: Thermio Seven Pi Pro (16 ohm x-over values) By: jlharden on Thu, 13 November 2003 08:52

Previous Topic:	DIY Racks
Next Topic:	Recent speaker project pics

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Sep 27 06:18:38 CDT 2024