AudioRoundTable.com: Pi Speakers » Thermio Seven Pi Pro (16 ohm x-over values)

Home » Sponsored » Pi Speakers » Thermio Seven Pi Pro (16 ohm x-over values)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 16 ohm tweeter crossover values [message #42997 is a reply to message #42991]

Tue, 11 November 2003 15:08

BillEpstein
Messages: 886
Registered: May 2009

Illuminati (2nd Degree)

My crossover is taken right from a calculator that used to be online:
woofer 4.5L then 8.2C, tweeter 8.2C and then 4.5L. Never did find the Re and Le of the 806A but 16Ohm shunt with 32Ohm parallel with .47 cap goes to the tweet.
Simple!
18 gauge aircores and Solens from PE but the att cap is Auricap.
Creating is more like performing than listening

Report message to a moderator

[Message index]

		Thermio Seven Pi Pro (16 ohm x-over values) By: jlharden on Tue, 11 November 2003 10:19
		16 ohm tweeter crossover values By: Wayne Parham on Tue, 11 November 2003 11:40
		Re: 16 ohm tweeter crossover values By: jlharden on Tue, 11 November 2003 11:54
		Re: 16 ohm tweeter crossover values By: BillEpstein on Tue, 11 November 2003 15:08
		My results with 4 Pi Pro using 16 ohm drivers By: spkrman57 on Tue, 11 November 2003 18:53
		Re: Thermio Seven Pi Pro (16 ohm x-over values) By: jlharden on Thu, 13 November 2003 08:52

Previous Topic:	DIY Racks
Next Topic:	Recent speaker project pics

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Aug 16 22:27:13 CDT 2024