AudioRoundTable.com: Pi Speakers » Pi seven port size using Altec 421A 15" Drivers

Home » Sponsored » Pi Speakers » Pi seven port size using Altec 421A 15" Drivers

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Pi seven port size using Altec 421A 15" Drivers [message #42970]

Sun, 09 November 2003 11:45

jumpin
Messages: 3
Registered: May 2009

Esquire

I am building a pair of Pi Sevens using altec 421A 15" 8ohm drivers. Could someone advise on correct port lenght and dia. Any advice on bracing would also be helpful. I am using 18mm MDF.

Cheers Jumpin

Report message to a moderator

[Message index]

		Pi seven port size using Altec 421A 15" Drivers By: jumpin on Sun, 09 November 2003 11:45
		Re: Pi seven port size using Altec 421A 15" Drivers By: Wayne Parham on Sun, 09 November 2003 14:41
		Re: Pi seven port size using Altec 421A 15" Drivers By: Manualblock on Sun, 09 November 2003 17:53
		If I am not mistaken... By: Shanko on Tue, 11 November 2003 18:36

Previous Topic:	Eminence X-over for 4Pi
Next Topic:	Ten Pi Plans

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Sep 18 05:15:24 CDT 2024