AudioRoundTable.com: Pi Speakers » Wayne, 16 ohm One-Pi speaker?

Home » Sponsored » Pi Speakers » Wayne, 16 ohm One-Pi speaker?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Wayne, 16 ohm One-Pi speaker? [message #42616]

Sun, 05 October 2003 09:00

Tubo
Messages: 5
Registered: May 2009

Esquire

Is there a way to make a 16-ohm One Pi? Different drivers, redesigned crossover perhaps? Reason I ask is that I would like to try Bruce Rosenblit's (transcendentsound.com) new SET OTL (shipping in December 2003) which puts out a meager 1.5 watts at 8 ohms, but a whopping 3 watts at 16 ohms! (I am not affiliated at all with Transcendent.)

Thanks,

Al Lau

Report message to a moderator

[Message index]

		Wayne, 16 ohm One-Pi speaker? By: Tubo on Sun, 05 October 2003 09:00
		One π using JBL 2115J By: Wayne Parham on Sun, 05 October 2003 11:35
		How about 16 ohm 100 db? By: Tubo on Sun, 05 October 2003 16:15
		Re: How about 16 ohm 100 db? By: Wayne Parham on Sun, 05 October 2003 19:47
		Re: Wayne, 16 ohm One-Pi speaker? By: steve f on Sun, 05 October 2003 18:57
		Re: Wayne, 16 ohm One-Pi speaker? By: dwkurfma on Mon, 06 October 2003 08:59
		Thanks guys, great suggestions! By: Tubo on Mon, 06 October 2003 21:05

Previous Topic:	TangBand 8" for P.A. woofer use... Thoughts?
Next Topic:	THD woofer measurement-what mic

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 17:02:48 CST 2024