AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » pi one question

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

pi one question [message #42060]

Wed, 30 July 2003 12:58

Demetrius
Messages: 4
Registered: May 2009

Esquire

First and foremost I'd like to thank Wayne. You are consistently kind and generous. This is a fascinating and, well, cool place. I appreciate the commonsense and elegant engineering and conversation.

I've been reading in here for a bit and recently collected some drivers. I had some JBL 077's and just added a pair of 2115H's. I have these in a recycled box, crosoverless,with a .47 microfarad cap. for the 077.

Is the 077 sufficiently similar to the 2405 to pair with the 2115H and fashion a pi 1? Is the 2115H sufficiently similar to the 2115?

I read ina thread about matching the sensitivities since the slot tweeter is more efficient than the full-range, 92db and 105 db respectively I think. Couldn't find specs for the 077.

So, can I make a pi one with these and if so could I get some guidance. Thanks.

Report message to a moderator

[Message index]

		pi one question By: Demetrius on Wed, 30 July 2003 12:58
		pi one answer By: Wayne Parham on Wed, 30 July 2003 15:10
		Re: pi one answer By: Demetrius on Thu, 31 July 2003 11:39
		Re: pi one question By: ToFo on Wed, 30 July 2003 16:23
		Series coil for JBL 2115's By: Wayne Parham on Wed, 30 July 2003 20:52
		Re: Series coil for JBL 2115's By: ToFo on Thu, 31 July 2003 00:31

Previous Topic:	Plasma tweeters
Next Topic:	Yet another 511B Update!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 04:37:37 CST 2024