AudioRoundTable.com: Pi Speakers » PSD 2002 modifications

Home » Sponsored » Pi Speakers » PSD 2002 modifications

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: rear chamber access [message #41882 is a reply to message #41881]

Thu, 10 July 2003 18:54

Adam
Messages: 419
Registered: May 2009

Illuminati (1st Degree)

I haven't messed with it much yet, but it occurs to me that a soldering iron with a melting tip would be good approach. Not as difficult to handle, probably give you a cleaner edge or as clean and if you happened to make contact with the diaphram by accident, you wouldn't do any damage as long as you didn't hold it there for a long time... Whereas with a cutting blade or whatever, you're screwed!!

Just a thought.

Adam

Report message to a moderator

[Message index]

		PSD 2002 modifications By: Adam on Thu, 10 July 2003 08:24
		Re: PSD 2002 modifications By: Wayne Parham on Thu, 10 July 2003 09:50
		Huh? By: mollecon on Thu, 10 July 2003 10:06
		Ferrofluid By: Wayne Parham on Thu, 10 July 2003 10:50
		Thx Wayne By: mollecon on Thu, 10 July 2003 16:57
		Re: PSD 2002 modifications By: Adam on Thu, 10 July 2003 10:46
		Reply from Eminence By: Adam on Thu, 10 July 2003 16:37
		rear chamber access By: ToFo on Thu, 10 July 2003 18:01
		Re: rear chamber access By: Adam on Thu, 10 July 2003 18:54
		and a good thought at that. By: ToFo on Thu, 10 July 2003 20:53
		Re: and a good thought at that. By: Adam on Thu, 10 July 2003 22:38
		Sorry, but I'm going to hang on to them... By: ToFo on Thu, 10 July 2003 22:55
		Re: Sorry, but I'm going to hang on to them... By: Adam on Fri, 11 July 2003 08:55
		Measurements By: Wayne Parham on Thu, 10 July 2003 22:11
		Re: Measurements By: Adam on Thu, 10 July 2003 22:38
		Re: Mic for Measurements By: wunhuanglo on Fri, 11 July 2003 03:07
		Re: Mic for Measurements By: Chris R on Sat, 12 July 2003 09:34
		Re: Mic for Measurements - SORRY! By: wunhuanglo on Sat, 12 July 2003 19:41

Previous Topic:	super tweeter for Pi 4 T
Next Topic:	JBL2226H+MAC40s+large room=Kick ass

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Oct 18 00:22:24 CDT 2024