AudioRoundTable.com: Pi Speakers » Help on making driver measurements, please?

Home » Sponsored » Pi Speakers » Help on making driver measurements, please?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Help on measurements, Thanks Bill [message #41792 is a reply to message #41791]

Wed, 02 July 2003 19:12

ToFo
Messages: 219
Registered: May 2009

Master

Bill,
in some of the speaker workshop forum post and links I noticed that some who could not get it to work at all had little trouble after the jig was made. Something about cable and aligator clips/crimps playing havoc with calibration values(sensitive i guess). there is also a modified jig that is somewhere on the SW page, supposed to be more flexible or...(it's not hard to find) The article I found most informative is below. Since you mentioned SW maybe you have seen this, but just in case.

Thomas F.

P.S. I am making a jig and trying to get SW going very soon, so I will let you know how it goes, or any tricks I learn if I do well.

this is it!

Report message to a moderator

[Message index]

		Help on making driver measurements, please? By: wunhuanglo on Sun, 29 June 2003 16:03
		Re: Help on making driver measurements, please? By: Bill Martinelli on Sun, 29 June 2003 19:02
		Re: Help on measurements, Thanks Bill By: wunhuanglo on Mon, 30 June 2003 15:40
		Re: Help on measurements, Thanks Bill By: Bill Martinelli on Tue, 01 July 2003 05:31
		Re: Woofer Tester By: AstroSonic on Tue, 01 July 2003 19:05
		Re: Help on measurements, Thanks Bill By: JS on Wed, 02 July 2003 16:35
		Re: Help on measurements, Thanks Bill By: Bill Martinelli on Wed, 02 July 2003 17:50
		Re: Help on measurements, Thanks Bill By: ToFo on Wed, 02 July 2003 19:12
		Re: Help on measurements, Thanks Bill By: JS on Thu, 03 July 2003 05:40

Previous Topic:	TAD-JBL-Pi 3-way update
Next Topic:	Holism and Reductionism - Fourier Series

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Jul 31 15:24:39 CDT 2024