If I have a 'scope and a swept audio generator, what else is required to produce a frequency respose graph? Specifically, what's required to plot the response of an active crossover? Would I need some sort of a log amp to measure in dB? Does the audio generator have to sweep at a particular rate? Is there a PC program to do the same thing, maybe easier? The active crossover I made a while ago seems to work really well and I'd like to develop it more (variable freq, HF comp, etc).
Wayne Parham Messages: 18698 Registered: January 2001
Illuminati (33rd Degree)
If you have a signal generator and scope, simply use a series of frequency points and measure the input and output voltages. This will allow you to plot a graph, which you can calibrate in linear voltage or in decibels. You'll probably want to scale with decibels, so convert voltage to decibels using the formula dB = 20log(Vout/Vin).
Sorry, I wasn't clear. I want to plot to display on the scope in real time. I guess I'd have to get the horizontal input tied to the freq. sweep signal. That I don't have. Chris
Wayne Parham Messages: 18698 Registered: January 2001
Illuminati (33rd Degree)
You're right that if you want to have an automatic process then you'll need a mechanism that synchronizes the generator sweep with the measurement device. You could have your computer D/A generate the sweep and read it with its A/D. Then synchronization would be a matter of timing logic in your code. Alternately, if your signal generator has some sort of synchronization signal, perhaps you could read it programmatically. Either way, you'll need to have a mechanism in place.
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
