AudioRoundTable.com: Pi Speakers » Power Handling of Pi Crossover

Home » Sponsored » Pi Speakers » Power Handling of Pi Crossover

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Power Handling of Pi Crossover [message #41409]

Sun, 18 May 2003 02:59

Adrian Mack
Messages: 568
Registered: May 2009

Illuminati (1st Degree)

Hey Wayne.

I would like to know the power handling of the Pi Crossover. Will probably be purchasing the components for the xover tomorow :-)

Thanks!
Adrian

Report message to a moderator

Re: Power Handling of Pi Crossover [message #41412 is a reply to message #41409]

Sun, 18 May 2003 13:45

Wayne Parham
Messages: 18785
Registered: January 2001

Illuminati (33rd Degree)

Power handling is determined by the limits of the components used. Coils and resistors are rated in maximum current and capacitors in maximum voltage. So you can get whatever size you need.

Check the π crossover document for more information. Pages 67-80 are specifically about power handling, and illustrate the requirements of each component with voltage curves.

Report message to a moderator

Previous Topic:	Baffle spacing, phase angles and time alignment, revisited
Next Topic:	Corner horn question

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 21 08:21:57 CST 2024