I run the Pialign software today and found that I can use 2 Alpha 10" driver for a corner horn and the size of the enclosure is Ht 33.83, WD 16.9 & DP is 8.456. My question is if I would to use the psd 2002 eminence comp driver what crossover point should I be looking at.

Thanks.

Zeno

Yes, I would expect the PSD2002 would work quite well in this arrangement. You really shouldn't crossover below 1.6kHz with this tweeter, but then again, there's no reason to consider going lower than that. The Alpha 10's work well an octave higher when used individually.

Wayne