AudioRoundTable.com: Pi Speakers » 4Pi-18 for bass amplification?

Home » Sponsored » Pi Speakers » 4Pi-18 for bass amplification?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

4Pi-18 for bass amplification? [message #41088]

Sun, 20 April 2003 15:33

bikehorn
Messages: 14
Registered: May 2009

Chancellor

I'm wondering if one of these would work nicely for amplifying my electric bass. Good idea, or not such a good idea?

Report message to a moderator

Re: 4Pi-18 for bass amplification? [message #41090 is a reply to message #41088]

Sun, 20 April 2003 15:58

Wayne Parham
Messages: 18754
Registered: January 2001

Illuminati (33rd Degree)

It would work just fine. I'm not sure you really need the compression horn though - Might be just as well omitting the crossover and leaving it off.

Report message to a moderator

Re: 4Pi-18 for bass amplification? [message #41093 is a reply to message #41088]

Sun, 20 April 2003 17:26

dbeardsl
Messages: 127
Registered: May 2009

Master

I built a similar cabinet for a buddy's electric bass with a JBL 15"
He had to eq the midrange (400hz - 2k or so) down a bit because the driver was almost ruler flat all the way to 3k but he really liked the sound and no need for a tweeter.

Danny

Report message to a moderator

Previous Topic:	Hey, Wayne! Check This Out.
Next Topic:	Smaller corner horns

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Aug 28 17:18:52 CDT 2024