Home » Sponsored » Pi Speakers » Paramours and other goodies for LIMA
Re: C4S [message #40743 is a reply to message #40733] Thu, 27 March 2003 14:13 Go to previous messageGo to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18792
Registered: January 2001
Illuminati (33rd Degree)
I expected that the C4S would decrease hum, but I wanted to hear the original design first. I guess I'll have to install it soon.

I was really impressed both with the quality and the quantity of sound. There is a bit of hum, but the hum reduction pots bring it down quite a bit. Gives it sort of a retro-50's sound, when most equipment was powered with a diode and cap. And really, it doesn't hum that much now and I suspect that the regulator board will reduce it further.

I was most interested in the bass response, because my speakers use 2226 woofers. I know that with some flea-power amps, the 2226 is a bit hard to drive. But I'm going to have to side with you and Ron that there was nothing lacking in the bottom octave in this combination. The bass was all there, all the way down, and very powerful.

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Question for Wayne Re: Paramour Parafeed caps with Pi Theater 4's
Next Topic: Alpha 6 and horn loading
Goto Forum:
  


Current Time: Wed Dec 04 21:52:29 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest