AudioRoundTable.com: Pi Speakers » JBL Tent amps: lots of watts for $$$

Home » Sponsored » Pi Speakers » JBL Tent amps: lots of watts for $$$

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

JBL power amps [message #40711 is a reply to message #40471]

Sun, 23 March 2003 20:42

Formica
Messages: 1
Registered: May 2009

Esquire

I just happened to come across this thread, and thought i'd let you guys know that I spoke with JBL about these, they are 220V Export models and the MPC200 and MPC300 can easily be rewired for 120V as they are internally wired to handle 3 voltages (100V japan, 120V america, and 220V europe)

The amps were all made by QSC, and the MPC200 is the same unit as the QSC CX4 and the MPC300 is a CX6. I posted a thread at the HT Forum in DIY about these at:

http://www.hometheaterforum.com/htforum/showthread.php?s=5d83e443f45681fc52aae4289b2a8976&threadid=131425

and i also posted the modification to convert them to 120V as described by JBL at:

http://www3.sympatico.ca/bonaz/JBL/JBL-MPC-230V-120V.htm

I have not done any of these modifications myself, and i don't have any info on the MPA units, but i hope this is of some help...

Rob

Report message to a moderator

[Message index]

		JBL Tent amps: lots of watts for $$$ By: BillEpstein on Sat, 01 March 2003 07:35
		Re: JBL Tent amps: lots of watts for $$$ By: Chris R on Sat, 01 March 2003 07:41
		220V outlets By: LuxmanLover on Sat, 01 March 2003 09:07
		does being made for 50Hz. power matter? By: Sam P. on Sat, 01 March 2003 09:45
		50-60Hz power By: Wayne Parham on Sat, 01 March 2003 12:50
		JBL power amps By: Formica on Sun, 23 March 2003 20:42
		Re: JBL power amps By: Wayne Parham on Sun, 23 March 2003 22:29

Previous Topic:	Finally... Finished Quasi 4pi (PICS)
Next Topic:	Eminence Delta series

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Aug 12 06:39:07 CDT 2024