| RCF N380 Compression Drivers for my JBL 2370A horns [message #40656] |
Mon, 17 March 2003 01:44  |
Adrian Mack
Messages: 568
Registered: May 2009
|
Illuminati (1st Degree) |
|
|
Hey everyone. I noticed RCF brand compression drivers today. I can get the RCF N380 second hand for AU$130 (so about US$80) each. I dont actually have much information on these, as the RCF website does not have it listed. However you can view a picture of it here (in the picture it has a throat adapter attached). Here it is http://www.ccslightsound.com.au/cimimages/secondhand/RCF_N380.jpg They look like rather old compression drivers to me from the photo. I am not even sure if it is a 1" driver, which my 2370A horns take. Any help would be greatly appreciated!
|
|
|
|
|
|
| Re: RCF N380 Compression Drivers for my JBL 2370A horns [message #40665 is a reply to message #40658] |
Mon, 17 March 2003 11:02  |
ToFo
Messages: 219
Registered: May 2009
|
Master |
|
|
Adrian,
I have to chime in with Wayne on this one.
"Eminence PSD2002's.....sound really good on 2370's"That is so true and at their price it is crazy how good they sound. At their price you can afford to roll the dice a little, but I don't think they will disappoint. They should cost less than the P Audio stuff you were looking at, but I do not know much about Austrailian trade laws. As you know I run them on 2370's and they really do a nice job. I hope the following info is useful to you. Later, Thomas Genuine Eminence Dealers
in Australia For Eminence products in Australia, please contact the following distributor.
Central Musical Instruments Contacts: Drago/Peter Trojkovic
36-38 Export Drive Brooklyn Victoria
Australia 3025 Telephone : 61-393152244 Fax : 61-393152115 email: cmi@cmi.com.au
web: www.cmi.com.au
|
|
|
|
|
|
|
|
|
|
| Re: Eminence PSD2002 Compression Drivers for my JBL 2370A horns [message #40672 is a reply to message #40671] |
Mon, 17 March 2003 23:25 |
Adrian Mack
Messages: 568
Registered: May 2009
|
Illuminati (1st Degree) |
|
|
Hey Wayne,I can get the Eminence PSD2002's in Australia from CMI for $AU170 each. YAHHOOOOO! Since a midrange tractrix horn will be used from 200Hz and up, can midrange tractrix horns when designed properly go to 1.6Khz, where the PSD2002 would be crossed? BTW: I have not designed or built the tractrix horns yet as the designing is HARD! I still have a lot to learn :( Am always up for it though :) Thanks!
Adrian
|
|
|
|
| Re: Eminence PSD2002 Compression Drivers for my JBL 2370A horns [message #40673 is a reply to message #40672] |
Mon, 17 March 2003 23:43 |
 |
Wayne Parham
Messages: 18786
Registered: January 2001
|
Illuminati (33rd Degree) |
|
|
|
Hi Adrian! You wrote: >> Since a midrange tractrix horn will be used from 200Hz and up,
>> can midrange tractrix horns when designed properly go to 1.6Khz,
>> where the PSD2002 would be crossed? Certainly, no problem. I think you'll be able to find several cone drivers that will mate well with your 200Hz horn and provide this bandwidth. Wayne
|
|
|
|
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
