AudioRoundTable.com: Pi Speakers » error in "bench" schematic

Home » Sponsored » Pi Speakers » error in "bench" schematic

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

error in "bench" schematic [message #40102]

Fri, 31 January 2003 10:34

Sam P.
Messages: 307
Registered: May 2009

Grand Master

is why Wayne needed to slap R17 in there. C3 is labeled 0.01u, it SHOULD be 0.001uF. Just correcting the value of C3 changes his LP response from peaky to nice:) Sam

Report message to a moderator

[Message index]

		error in "bench" schematic By: Sam P. on Fri, 31 January 2003 10:34
		Re: error in "bench" schematic By: Wayne Parham on Fri, 31 January 2003 11:15
		C3 is cap for 2nd LP pole By: Sam P. on Fri, 31 January 2003 13:32
		Re: C3 is cap for 2nd LP pole By: Wayne Parham on Fri, 31 January 2003 22:12
		you have mail:) By: Sam P. on Fri, 31 January 2003 13:40

Previous Topic:	Thoughts on JBL MPA amps...
Next Topic:	A little confusion. Re: Theater 4 Baffle cutout

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 29 21:31:37 CST 2024