AudioRoundTable.com: Pi Speakers » Going to build the 800a009dB X-over from scratch; need help with C5 and R3

Home » Sponsored » Pi Speakers » Going to build the 800a009dB X-over from scratch; need help with C5 and R3

Sun, 19 January 2003 12:26

spkrman57
Messages: 522
Registered: May 2009

Illuminati (1st Degree)

TillE,
JBL 2226J/re = 12 ohms and your cap will be 15.5 ufd(14.7ufd will work fine) and 15 or 16 ohm resistor will be your zoebel figures.
Ron

		Going to build the 800a009dB X-over from scratch; need help with C5 and R3 By: BillEpstein on Sun, 19 January 2003 11:10
		Correction to your formula By: spkrman57 on Sun, 19 January 2003 12:26
		Zobel network - C5 and R3 By: Wayne Parham on Sun, 19 January 2003 12:52

Previous Topic:	Wayne and crossover guys; a little help?
Next Topic:	Wayne, please review piezo attenuation values

Goto Forum:

] [

]

Current Time: Mon Jul 15 22:33:03 CDT 2024