AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Woofer-tweeter

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Electrical filters [message #39881 is a reply to message #39880]

Mon, 13 January 2003 14:57

Wayne Parham
Messages: 18747
Registered: January 2001

Illuminati (33rd Degree)

The coil that is used in this design is to compensate for rising on-axis response in the midwoofer. If the one you are using has this kind of response, then you might do the same thing. But the choice of reactive components in the signal path is something that you should examine on a case-by-case basis. It's not a "one size fits all" solution.

Report message to a moderator

[Message index]

		Woofer-tweeter By: Mike Centracchio on Sun, 12 January 2003 12:08
		Re: Woofer-tweeter By: Wayne Parham on Sun, 12 January 2003 12:52
		But Mike says the tweeter is the less efficient driver (nt) By: Patrick Kopson on Mon, 13 January 2003 05:17
		To attenuate the woofer, just use a resistor or L-Pad By: Wayne Parham on Mon, 13 January 2003 13:18
		Re: To attenuate the woofer, just use a resistor or L-Pad By: Mike C on Mon, 13 January 2003 14:27
		Electrical filters By: Wayne Parham on Mon, 13 January 2003 14:57
		Re: Woofer-tweeter By: JLapaire on Mon, 13 January 2003 06:36
		Re: Woofer-tweeter By: DRC on Mon, 13 January 2003 10:32
		Re: Woofer-tweeter By: JLapaire on Tue, 14 January 2003 03:20

Previous Topic:	How many of you have "Soular Energy"? Hands?
Next Topic:	Let's try those 2Pi Towere pictures again.

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Aug 11 06:17:24 CDT 2024