AudioRoundTable.com: Pi Speakers » JBL 4648A with SET's?

Home » Sponsored » Pi Speakers » JBL 4648A with SET's?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: JBL 4648A with SET's? [message #39345 is a reply to message #39336]

Wed, 04 December 2002 18:42

jlharden
Messages: 94
Registered: May 2009

Viscount

Hi Wayne!

If I recall the Zmax of the 2226H was around 55 ohms, assuming two 2226J's are electrically very similar, the impedance at resonance shouldn't be an issue. The increased sensitivity is always a plus. I don't understand how two drivers offer greater extension than one though. I thought the actual response would be the same but a bit more efficient accross the bandwidth.

Report message to a moderator

[Message index]

		JBL 4648A with SET's? By: jlharden on Wed, 04 December 2002 06:07
		Re: JBL 4648A with SET's? By: BillEpstein on Wed, 04 December 2002 07:14
		Re: JBL 4648A with SET's? By: jlharden on Wed, 04 December 2002 08:56
		Re: JBL 4648A with SET's? By: Wayne Parham on Wed, 04 December 2002 12:23
		Re: JBL 4648A with SET's? By: jlharden on Wed, 04 December 2002 18:42
		Tube friendly JBL's By: Wayne Parham on Wed, 04 December 2002 22:28
		Re: Tube friendly JBL's; Only In Ohio By: BillEpstein on Thu, 05 December 2002 02:27
		Re: Tube friendly JBL's By: mikebake on Thu, 05 December 2002 05:31
		dual 15's By: Sam P. on Thu, 05 December 2002 05:39
		Re: dual 15's By: jlharden on Fri, 06 December 2002 10:57
		Re: JBL 4648A with SET's? By: mikebake on Wed, 04 December 2002 13:46
		Re: JBL 4648A with SET's? By: jlharden on Wed, 04 December 2002 18:48
		4648a-8 z peaks By: Sam P. on Thu, 05 December 2002 09:30
		Re: 4648a-8 z peaks By: jlharden on Thu, 05 December 2002 10:27
		yes, By: Sam P. on Thu, 05 December 2002 13:13

Previous Topic:	1 PIs in 9ltr sealed box ??
Next Topic:	pi 7 and suitable driver,and wayne,dont u get tired of this lol

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 15 11:15:34 CST 2024