AudioRoundTable.com: Pi Speakers » Height for the Pi 4

Home » Sponsored » Pi Speakers » Height for the Pi 4

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

AHA! Allrighty then [message #38868 is a reply to message #38867]

Tue, 29 October 2002 08:19

JLapaire
Messages: 156
Registered: May 2009

Master

I've seen posts describing that before but never quite got it.
Hope this works, pic of my next project, not a Pi box, but everything else will be Theater 4.

Inside of front chamber of Karlson K15/X15 hybrid before slot is installed, badly cropped at 5:30 this morning. Shows curved reflector, standoffs, shelf, baffle for the mighty Delta 15a.

Thanks Till!

John

Report message to a moderator

[Message index]

		Height for the Pi 4 By: Zeno on Mon, 28 October 2002 14:52
		Re: Height for the Pi 4 By: Wayne Parham on Mon, 28 October 2002 15:00
		Re: Height for the Pi 4 By: laoye on Mon, 28 October 2002 18:43
		Re: chair vrs the ceiling By: bmar on Mon, 28 October 2002 20:00
		Re: chair vrs the ceiling By: BillEpstein on Mon, 28 October 2002 20:40
		Re: chair vrs the ceiling By: bmar on Tue, 29 October 2002 14:51
		photo posting By: Zeno on Tue, 29 October 2002 01:52
		Re: photo posting: "...add the whites of 2 eggs to.... By: BillEpstein on Tue, 29 October 2002 04:25
		AHA! Allrighty then By: JLapaire on Tue, 29 October 2002 08:19
		John, Your really smokin' on those things... By: Garland on Tue, 29 October 2002 09:26
		Re: John, Your really smokin' on those things... By: DRC on Tue, 29 October 2002 11:54
		Yeah, that's wot gets stood off By: JLapaire on Wed, 30 October 2002 03:16
		Re: Yeah, that's wot gets stood off By: DRC on Wed, 30 October 2002 04:02
		Straight-ahead what cabinet? By: JLapaire on Wed, 30 October 2002 08:33
		I think it might be. I can't remember . . . (n/t) By: DRC on Wed, 30 October 2002 08:57

Previous Topic:	...one more time....Now Playing, 2Pi's
Next Topic:	Gettin' down to Crossover Cases

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Apr 29 04:15:44 CDT 2025