Home » Sponsored » Pi Speakers » Building 2pi Towers - COMPLETE!
Re: Building 2pi Towers - COMPLETE! [message #38707 is a reply to message #38703] Fri, 18 October 2002 06:48 Go to previous messageGo to previous message
Fresno is currently offline  Fresno
Messages: 41
Registered: May 2009
Baron
>>Do you have a raised hardwood floor, on a second floor or are you
>>on a concrete slab?

I am in a finished basement with a w/w rug on the concrete. 26' x 19'. The front and back walls are panelling an ich or two away from concrete. The side walls are panelling with rooms on the other side.

>>Do you have anything else you can compare with - A different amp,
>>for example?

I hooked them up to my sand amp, SONY STR-DE935, the bass is a bit better. Being able to crank them up louder, I noticed that there was very 'excursion' of the woofer until very high loadness. By excursion I am referring to being able to see the cone move enough to move in and out at the ripples on the outer edge of the cones.

>>Same question on the speakers, are they bass-shy on the same amp,
>>different amps and/or in different rooms?

Not able to test this out yet, won't be able to test different rooms.

Would you like to swing by this weekend and check things out? ;)


 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Horns Length, Frequency Wave Lengths, And, All That Good Stuff
Next Topic: How long would a 2-3/4" diameter port be for Studio 2pi?
Goto Forum:
  


Current Time: Wed Aug 14 12:32:29 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest