AudioRoundTable.com: Pi Speakers » Wayne and other MathGuys: a little help with volume and port length please?

Home » Sponsored » Pi Speakers » Wayne and other MathGuys: a little help with volume and port length please?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Wayne and other MathGuys: a little help with volume and port length please? [message #38636]

Fri, 11 October 2002 18:21

BillEpstein
Messages: 886
Registered: May 2009

Illuminati (2nd Degree)

The almost 2Pi in my post below consists of a bottom cubisty deal 10X15X3 and an upper trapezoidal thingy shape that tapers back from the front so the top is 6 1/2X15, 22 1/2" up from the top of the base. Overall height of the entire speaker Q.E.D. = 25 1/2. Facil, N'est pas?
So is that somewhere close to the normal 2Pi volume? I have plastic ports,1 7/8" I.D. X 4" long max. Enough?
Hey, I know enough math that I was long 300 OEX puts on October 19, 1987, so there!

Report message to a moderator

[Message index]

		Wayne and other MathGuys: a little help with volume and port length please? By: BillEpstein on Fri, 11 October 2002 18:21
		Composite solid geometry By: Wayne Parham on Fri, 11 October 2002 19:03
		Re: What you said By: BillEpstein on Fri, 11 October 2002 19:23
		Perfect! By: Wayne Parham on Fri, 11 October 2002 20:02
		Re: hows 1.3 cu/ft sound By: bmar on Fri, 11 October 2002 19:27
		Yup! Yup! Yup! 1.36 internal, Yup! NT By: BillEpstein on Fri, 11 October 2002 19:40
		Perfect! By: Wayne Parham on Fri, 11 October 2002 20:08

Previous Topic:	JBL 2426 vs PSD2002 crossover
Next Topic:	Now these are really amazing!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Dec 01 23:11:40 CST 2024