AudioRoundTable.com: Pi Speakers » 4-pi hig freqency response

Home » Sponsored » Pi Speakers » 4-pi hig freqency response

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Tweeter compensation cable assembly [message #38508 is a reply to message #38505]

Mon, 30 September 2002 15:01

Wayne Parham
Messages: 18786
Registered: January 2001

Illuminati (33rd Degree)

The 2426 has good high frequency response for a 1" exit compression driver. Are you sure you built the compensation network properly? If you have a 12dB compensation network, then cymbols should sound crisp. But if you don't have the network, they will really lack luster.

So let's look over the tweeter cable assembly together. Please tell me what and how you have connected.

Report message to a moderator

[Message index]

		4-pi hig freqency response By: JBLman on Mon, 30 September 2002 14:35
		Tweeter compensation cable assembly By: Wayne Parham on Mon, 30 September 2002 15:01
		Re: Tweeter compensation cable assembly By: JBLman on Tue, 01 October 2002 07:17
		Re: Tweeter compensation cable assembly By: Wayne Parham on Tue, 01 October 2002 10:35
		bypass cap installed on your cable assemblies?(nt) By: Sam P. on Tue, 01 October 2002 13:50
		That's the most common cause of this symptom By: Wayne Parham on Tue, 01 October 2002 20:59

Previous Topic:	Downsizing Pi plans
Next Topic:	Re: Grill Cloth

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Nov 25 07:37:02 CST 2024