AudioRoundTable.com: Pi Speakers » Will mounted 2426 fit through horn hole?

Home » Sponsored » Pi Speakers » Will mounted 2426 fit through horn hole?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Leave the horn loose during assembly [message #38486 is a reply to message #38485]

Sun, 29 September 2002 16:36

Wayne Parham
Messages: 18790
Registered: January 2001

Illuminati (33rd Degree)

That's exactly what you must do, but mount the driver to the horn before mounting the horn to the cabinet. The thing to do is to preassemble the 2426/H290 combination, so that you know everything fits. Then take the assembly back apart and put the horn in the baffle cutout, and re-attach the compression driver while the horn is still loose. That way you can move the entire assembly around to get access to each of the bolts.

It's really not too bad. It isn't as easy as the PSD2002, since it uses two-bolt mounting and will fit through the baffle cutout. But with the horn loose in the cabinet, you'll find that assembly isn't too difficult.

Report message to a moderator

[Message index]

		Will mounted 2426 fit through horn hole? By: laoye on Sun, 29 September 2002 04:56
		remove woofer?nt By: Sam P. on Sun, 29 September 2002 08:40
		Sam's right. By: Wayne Parham on Sun, 29 September 2002 12:01
		I must be missing something... By: laoye on Sun, 29 September 2002 15:31
		Leave the horn loose during assembly By: Wayne Parham on Sun, 29 September 2002 16:36
		the psd-2002 fits thru the opening By: Sam P. on Sun, 29 September 2002 16:38

Previous Topic:	THEATRE 4 Plans
Next Topic:	4Pi Pro crossover

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 29 13:25:53 CST 2024