AudioRoundTable.com: Pi Speakers » 2pi port length in larger cabinet?

Home » Sponsored » Pi Speakers » 2pi port length in larger cabinet?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

2pi port length in larger cabinet? [message #38392]

Sat, 21 September 2002 09:34

Patrick Kopson
Messages: 26
Registered: May 2009

Chancellor

If I build my 2pi's in 3207 cubic inch cabinets (28.5% bigger than standard), what would the correct port length be?

Report message to a moderator

Make it 1.125" long [message #38394 is a reply to message #38392]

Sat, 21 September 2002 11:46

Wayne Parham
Messages: 18730
Registered: January 2001

Illuminati (33rd Degree)

If you're using 2" port diameter, then make it 1 1/8" long. I think I'd use a piece of 5/8" wood stock glued to a 5/8" baffle, which would then be 1 1/8" thick. Just drill a 2" hole, sand lightly and paint it black. Voila!

Report message to a moderator

Previous Topic:	Horn Loading
Next Topic:	oops!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Jul 21 13:16:40 CDT 2024