AudioRoundTable.com: Pi Speakers » Help me! What to do about 2Pi port

Home » Sponsored » Pi Speakers » Help me! What to do about 2Pi port

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Help me! What to do about 2Pi port [message #38346 is a reply to message #38343]

Wed, 18 September 2002 15:09

Matts
Messages: 359
Registered: May 2009

Grand Master

When I made mine, I couldn't get the tube to fit through the hole to go flush with the front of the baffle. I subtracted the thickness of the baffle and just glued a piece of the cardboard tubing on the rear of the baffle. It fit close enough, and with an extra coat of glue and some flat black paint throughout it looks good.

Report message to a moderator

[Message index]

		Help me! What to do about 2Pi port By: BillEpstein on Wed, 18 September 2002 13:56
		Did we forget to include duct material in your kits? By: Wayne Parham on Wed, 18 September 2002 14:07
		Re: Did we forget to include duct material in your kits? By: BillEpstein on Wed, 18 September 2002 16:50
		Re: Did we forget to include duct material in your kits? By: Wayne Parham on Wed, 18 September 2002 17:14
		Re: Help me! What to do about 2Pi port By: Edwin on Wed, 18 September 2002 14:48
		Re: Help me! What to do about 2Pi port By: Matts on Wed, 18 September 2002 15:09
		Re: Help me! What to do about 2Pi port By: bmar on Wed, 18 September 2002 17:42
		It's not the 70 cents........ By: BillEpstein on Wed, 18 September 2002 17:55
		Re: It's not the 70 cents........ By: bmar on Wed, 18 September 2002 18:37

Previous Topic:	2pi tower Box Dimensions
Next Topic:	2 Pi's completed

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 29 23:32:59 CST 2024